Toshiba PSLU0U-023003 Satellite L500 Series (PSLU0U, PSLV0U, PSLV6U) User's Gu - Page 55
removing/installing the bottom module., another, you must remove the top module first before
View all Toshiba PSLU0U-023003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Getting Started Adding memory (optional) 55 Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 10 Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 58. NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module. NOTE For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket