Toshiba Portege M400 PPM40C Users Manual Canada; English - Page 175

HW Setup Select either the Execute-Disable Bit Capability or settings in the security controller to make changes. Please refer to the operating instructions displayed in the settings screen. Ending the BIOS Setup Program Save the changes and end the program. 1. Press the End Key. The "Are you sure? (Y/N) The changes you made will cause the system to reboot." message is displayed. 2. Press the Y key. The configured settings are saved and the BIOS setup program ends. The computer may reboot depending on the settings that were modified. Ending the BIOS Setup Program Halfway The configuration settings can be terminated halfway without saving any of the changes made. 1. Press the Esc key. The "Exit without saving? (Y/N)" message is displayed. 2. Press the Y key. The BIOS setup program will end. Core Multi - Processing The Core Multi-Processing sets the CPU operating mode. Enabled is Dual Core mode. Disabled is Single Core mode. Enabled Disabled Enables Core Multi - Processing functions (Default). Disables Core Multi - Processing functions. Virtualization Technology Virtualization Technology sets enable or disable of the Intel Virtualization Technology installed in the CPU. Intel Virtualization Technology is the technique that allows one machine to operate as multiple virtual machines. The Disabled command does not allow use of the Intel Virtualization Technology. The Enabled command allows use of the Intel Virtualization Technology. Enabled Enables Virtualization Technology. Disabled Disables Virtualization Technology (Default). User's Manual 7-9