Toshiba Portege M500 PPM51C Users Manual Canada; English - Page 163
Diagnostic Mode
View all Toshiba Portege M500 PPM51C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
HW Setup Clear TPM Owner This setting is used to erase the data in TPM when disposing of the computer or when the owner of the computer changes, etc. Once this operation is carried out, the TPM configuration settings are erased, such that the encrypted data can no longer be decrypted and the files can no longer be read. Please backup or delete the data as necessary before carrying out this operation. The operating procedure is as follows: 1. Move the cursor to the Clear TPM Owner setting and press the Space key or BkSp key. 2. A message is displayed. Press the Y, E, S, and Enter keys and the TPM information is erased. 3. The TPM setting changes from being displayed as Enable to Disabled, and the setting is no longer displayed. ■ System configuration changes other than changes to this setting should be made in Windows using TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Device Manager, etc. ■ When using TPM, please install the Infineon TPM Installation Guide from the TOSHIBA Application Installer. Please ensure that the user reads the Infineon TPM Installation Guide as it contains usage information and notes on using TPM. Diagnostic Mode Set whether the BIOS Setup Diagnostic test is enabled. Disabled (Default) The Diagnostic test is disabled. Enabled The Diagnostic test is enabled. User's Manual 7-11