Toshiba Portege M700 PPM70A-0G301G Users Manual Canada; English - Page 81
Start, Control Panel, System and Maintenance, System, Power and Power-Up Modes
View all Toshiba Portege M700 PPM70A-0G301G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Hardware, Utilities and Options 11. Screw in the two screws and replace the memory module cover. Screws Memory module cover Figure 3-12 Seating the memory module cover 12. Insert the tabs on the front of the keyboard into the corresponding notches on the computer and place the keyboard down. When seating the keyboard, be sure to connect the circuit board if the keyboard ribbon cable was pulled out while you were removing the keyboard. 13. Replace the keyboard and secure it using the two screws. Be sure to use all two screws removed in step 7. Make sure no screw was dropped into the computer. Make sure no foreign matter can be found inside the computer. Tabs Keyboard Screws Figure 3-13 Replace the keyboard 14. Set the keyboard brace into its groove and hold down to secure the latches. 15. Install the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, for details. 16. Turn your computer over. 17. Turn the computer on and make sure the added memory is recognized - to confirmed it, Start -> Control Panel -> System and Maintenance > System icon. User's Manual 3-27