Toshiba Portege R100 User Manual - Page 57
Start, Turn off computer, Turn Off, the module is installed in slot A, thee will be a long beep
View all Toshiba Portege R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Getting Started Adding Memory (optional) 57 Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. A memory module must be installed in slot A. do not try to operate the computer with a memory module in slot B only. If you install a memory module that is incompatible with the computer, a beep will sound when you turn on the computer. If the module is installed in slot A, thee will be a long beep followed by a short beep. If the module is in slot B, there will be a long beep followed by two short beeps. In this case, turn off the computer and remove the incompatible module.If the computer is on, begin at step 1; otherwise, skip to step 3. 1 If the computer is on, click Start, Turn off computer. The Turn off computer window appears. 2 Click Turn Off. The operating system turns off the computer. 3 Unplug and remove any cables connected to the computer. 4 Remove the battery (see "Removing the battery from the computer" on page 120). 5 Close the display panel and turn the computer upside down to locate the expansion memory slot cover to the memory slot.