Toshiba Portege R30-C PT365C-00V00G Users Manual Canada; English - Page 92
Start, Shut down, Power, Removing the battery pack
View all Toshiba Portege R30-C PT365C-00V00G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Do not remove the battery pack while the computer is in Sleep Mode, as data is stored in RAM, so if the computer loses power it might be lost. In Hibernation Mode, data will be lost if you remove the battery pack or disconnect the AC adaptor before the save is completed. Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries. Removing the battery pack To remove a discharged battery, do the following: 1. Save your work. 2. Click Start, and click Shut down. Ensure that the Power indicator is off. 3. Remove all cables and peripherals that are connected to the computer. 4. Close the display panel and turn the computer upside down. 5. Slide the battery lock into its unlocked ( ) position. 6. Slide and hold the battery release latch to disengage the battery pack and then lift it up to remove it from the computer. Figure 4-7 Releasing the battery pack (R30-C/A30-C) 1 2 3 1. Battery lock 2. Battery release latch 3. Battery pack Product appearance depends on the model you purchased. Installing the battery pack To install a battery pack, do the following: User's Manual 4-31