Toshiba Qosmio G30 Users Manual Canada; English - Page 219

Troubleshooting Problem Procedure Battery doesn't power the computer as long as expected If you frequently recharge a partially charged battery, the battery might not charge to its full potential - in these instances you should fully discharge the battery and then attempt to charge it again. Check the power consumption settings within the TOSHIBA Power Saver and consider using a power saving mode. Real Time Clock Problem Procedure The following message is Displayed on the LCD screen: RTC battery is low or CMOS checksum is inconsistent. Press [F1] key to set Date/Time. The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps: 1. Press the F1 key - the BIOS setup application will load. 2. Set the date in the System Date field. 3. Set the time in the System Time field. 4. Press the End key - a confirmation message will be displayed. 5. Press the Y key - the BIOS setup application will end and the computer will restart. Password Problem Cannot enter password Procedure Please refer to the TOSHIBA Password Utility section in Chapter 6, Power for further information. User's Manual 10-7