Toshiba R600-S4212 User Manual - Page 120

Operating Basics ■ The Wake-up on Wireless LAN function lets the computer's power be turned on when the computer receives a wake-up signal from the administrator's computer via a wireless network. Some models are equipped with a Wake-up on Wireless LAN function. ■ The Wake-up on Wireless LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. ■ The Wake-up on Wireless LAN function is effective only when it is connected with an Access Point. This function becomes invalid when the connection is broken. ■ Frequency Channel Selection of 5GHz for IEEE 802.11a or/and IEEE802.11n draft 2.0 ■ Frequency Channel Selection of 2.4GHz for IEEE 802.11b/g or/and IEEE802.11n draft 2.0 ■ Roaming over multiple channels ■ Card power management ■ Wired Equivalent Privacy (WEP) data encryption based on an 128-bit encryption algorithm ■ Wi-Fi Protected Access™ (WPA™) ■ The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach, may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, client design and software/hardware configurations. The transmission rate described is the theoretical maximum speed as specified under the appropriate standard - the actual transmission speed will be lower than the theoretical maximum speed. ■ New wireless network adapter "AR9281" supports IEEE802.11b/g/draft-n but does not support IEEE802.11a. Setting 1. Please make sure that the Wireless Communication Switch is turned on. 2. Click Start and then click Connect To to display Connect to a network window. 3. Click Set up a connection or network. 4. Follow the wizard. You will need the name of the wireless network together with security settings. Consult the documentation accompanied with your router or ask your wireless network administrator for the settings. User's Manual 4-37