Toshiba R600-S4213 Maintenance Manual - Page 145

3.10 Floppy Disk Test 3.10 Floppy Disk Test 3 Tests and Diagnostics CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. The contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen. 1. The following message will appear. Select the media mode and start track to be tested, then press Enter. Test start track (Enter:0/dd:00-79) ? 2. The Floppy Disk test contains five subtests that test the FDD. The floppy disk test menu will appear after you select FDD test parameters. FLOPPY DISK XXXXXXX XXX DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST PASS COUNT WRITE DATA ADDRESS : XX : XXXXX : XX : XXXXXX ERROR COUNT READ DATA STATUS SUB-TEST MENU : 01 - Sequential read 02 - Sequential read/write 03 - Random address/data 04 - Write specified address 05 - Read specified address 99 - Exit to DIAGNOSTIC TEST MENU : XXXXX : XX : XXX PORTEGE R600 Maintenance Manual (960-709) [CONFIDENTIAL] 3-21