Toshiba SD-1200U Owners Manual - Page 43
Calling, Service, Personnel
View all Toshiba SD-1200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
fore Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom Cause Correction Page No power. • The power plug is disconnected. • Connect the power plug securely into the 16 wall outlet. The DVD video player turned • The automatic power off function turned • Press the PLAY button. 21 off by itself. the unit off. No picture. • The TV is not set to receive DVD signal • Select the appropriate video input mode 20 output. on the TV so the picture from the DVD video player appears on the TV screen. • The video cable is not connected securely. • Connect the video cable securely into the 16, 17 appropriate jacks. No sound. • The equipment connected with the audio • Select the correct input mode of the 20 cable is not set to receive DVD signal audio receiver so you can listen to the output. sound from the DVD video player. • The audio cable is not connected securely. • Connect the audio cable securely into the 16, 17 appropriate jacks. 18, 19 • The audio receiver or TV is turned off. • Turn on the equipment connected with 20 the audio cable. • The setting of output sound format is incorrect. • Select the proper audio setting. 33, 35 39 The playback picture has occasional distortion. • The disc is dirty. • It is in fast forward or fast reverse playback. • Eject the disc and clean it. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. 9 O - eD N Brightness is unstable or noises are present in the playback pictures. • The effect of copy protection. • Connect the DVD video player directly to 16 the TV. Avoid connecting the DVD video player to a VCR or TVNCR combination. The DVD video player does not start playback. • No disc is inserted. • An unplayable disc is inserted. • Insert a disc. 20 • Insert a playable disc. (Check the disc 10 type and color system.) • The disc is placed upside down. • Place the disc with the playback side 20 down. • The disc is not placed within the guide. • Place the disc correctly inside the guide 20 on the disc tray. • The disc is dirty. • Clean the disc. 9 • The parental lock function is set. • Cancel the parental lock function or change the parental lock level. 35, 40 Playback does not follow the • It is in the mode of repeat playback, course of the disc's program. memory playback, etc. • These operations may prevent a proper - progress of the contents. Buttons do not work. • Power supply fluctuations or other • Turn the power on or off with the POWER - abnormalities such as static electricity may button. Or disconnect the power plug and interrupt correct operations. insert it into the wall outlet again. The remote control does not • The remote control is not pointed at the • Point the remote control at the remote 15 work properly. remote sensor of the DVD video player. sensor of the DVD video player. • The remote control is too far from the DVD • Operate the remote control within about 15 video player. 7 m. • The batteries in the remote control are • Replace the batteries with new ones. 15 exhausted. 43