Toshiba SD-K510U Owners Manual - Page 20

Connections Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Manufactured under license from Dolby Laboratories. "Dolby" "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. • Use DVD video discs encoded via the Dolby Digital recording system. • Make the following setting. Amplifier equipped with a Dolby Digital decoder To COAXIAL type digital audio input VIDEO Y PB PR VIDEO OUT S R L COAXIAL AUDIO OUT ANALOG BITSTREAM/PCM DIGITAL To BITSTREAM/ PCM AUDIO OUT 75 Ω coaxial cable On-screen display "Audio Out Select" Recording system Select: "Bitstream" D Page 48 50 43 Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. With an amplifier not equipped with Dolby Digital Connect the equipment as follows. Amplifier equipped with VIDEO Y PB PR * Dolby Surround Pro Logic VIDEO OUT S R L COAXIAL AUDIO OUT ANALOG BITSTREAM/PCM DIGITAL To audio input To ANALOG AUDIO OUT Audio cable • Make the following setting. On-screen display Select: Page "Audio Out Select" "Analog 2ch" 48 50 Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Surround Pro Logic using this connection. * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. 21