Toshiba SD-K615U Owners Manual - Page 10

Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the player's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 11. Rear of TV AUDIO INPUT L R VIDEO INPUT A V COMPONENT VIDEO INPUT Y PB PR S-VIDEO INPUT C S Caution - Make sure the DVD Player is connected directly to the TV. Select the TV to the corresponding video input. - Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (Turntable) of your audio system. - Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection system. Connecting to a TV Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT VIDEO OUT jacks, set the VIDEO OUTPUT switch to COMPONENT. When using the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to S-VIDEO. Video connection (Good) 1 Connect the VIDEO OUT jack on the DVD Player to the video in jack on the TV using the video cable supplied (V). 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. Rear of DVD player Note If the TV has an S-video input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. S-Video connection (Better) 1 Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using an optional S-Video cable (S). 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. Component Video (Color Stream®) connection (Best) 1 Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using an optional Y PB PR cable (C). 2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV (A) using the supplied audio cables. 10