Toshiba SD-P2800 User Manual - Page 66

Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom No power. The LCD turned off by itself. No picture. (Other than builtin LCD monitor) No sound. (Connected TV or audio system. The playback picture has occasional distortion. Brightness is unstable or noises are present in the playback pictures. (Other than built-in LCD monitor) The player does not start playback. Cause • The AC adapter or power plug is disconnected. • The battery pack has been removed. • Battery empty. • The automatic LCD off function turned the LCD off. • The connected TV is not set to receive DVD signal output. • The equipment connected via the audio/ video cable is not set to receive DVD signal output. • The volume is too low. • The audio receiver or TV is turned off. • The setting of output sound format is incorrect. • The disc is dirty. • Player is in fast forward or fast reverse mode. • The player was moved or given a shock. • The disc is not set firmly. • The effect of copy protection. Correction • Connect the AC adapter or power plug securely. • Install the battery pack. • Re-charge the battery. • Press any button. Page 16 60 60 21 • Select the appropriate video input mode on the TV so the picture from the player appears on the TV screen. • Select the correct input mode of the audio receiver so you can listen to the sound from the player. • Adjust the volume by turning the volume control. • Turn on the equipment connected with the audio/video cable. • Select the proper audio setting. • Eject the disc and clean it. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. • Vibrating or shaking the player during playback may produce distortion. This is not a malfunction. If not restored to usual status, stop playback and start again. • Remove the disc and set it again. • Connect the player directly to the TV. Avoid connecting the player to a VCR or TV/VCR combination. 54 54 , 55 19 54 - 59 40, 46 50 8 - - 18 54 • No disc is inserted. • An unplayable disc is inserted. • The disc is inserted upside down. • The disc is not inserted securely. • Insert a disc. 18 • Insert a playable disc. (Check the disc 9 type, color system and region number.) • Insert the disc with the playback side 18 down. • Insert the disc securely in the disc holder. 18 • The disc is dirty. • Clean the disc. 8 • The parental lock function is set. • Cancel the parental lock function or 50 change the parental lock level. • The player is set to the external input mode (AV-IN). • To play a disc with the player, LCD 54 Screen Only or AV-OUT needs to be set. Press MODE and switch to LCD Screen Only. Playback does not follow the • It is in the repeat playback mode, memory • These operations may prevent a proper - course of the disc's program. playback, etc. progression of the contents. Buttons do not work. • Power supply fluctuations or other • Turn the power on or off with the POWER - abnormalities such as static electricity may switch. Or disconnect the power plug and interrupt correct operation. insert it into the wall outlet again. 66