Toshiba SD-V594 User Manual - Page 23
Notes, Picture Output, DVD Mode, VCR Mode, <During HDMI Output>, <When HDMI Output setting
View all Toshiba SD-V594 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connections The content of the output for each output jack are as shown in the following table and differ depending on User settings/operation. USER setting/operation Mode VCR/DVD VCR DVD HDMI Output *1 Off 480p 720p 1080i 480p 720p 1080i Off 480p 720p 1080i 480p 720p 1080i Output Setting Interlace Progressive Interlace Progressive Interlace Progressive Interlace Progressive HDMI - 480p (DVD) 720p (DVD) 1080i (DVD) 480p (DVD) 720p (DVD) 1080i (DVD) - 480p (DVD) 720p (DVD) 1080i (DVD) 480p (DVD) 720p (DVD) 1080i (DVD) Content of output for each output jack Video S-Video DVD - Component 480i (DVD) 480p (DVD) VCR - - DVD DVD - DVD - - 480i (DVD) 480p (DVD) - - - - RF Modulator VCR DVD - *1: Settings for HDMI output format are performed using the "HDMI" key on the remote control. 3 Picture Output • DVD Mode The following refers to instructions for Picture Output in DVD Mode. There is no Analog Output (*2) for HDMI output. When HDMI output setting is "Off", there is no HDMI output. *2: Output from Video out jack/S-Video out jack/Component out jacks • VCR Mode The following refers to instructions for Picture Output in VCR mode. This set outputs the picture from the Video out jack in VCR mode. However, please see the following instructions for HDMI out jack/S-Video out jack/Component out jacks. DVD picture is always output from HDMI out jack during HDMI Output, but it cannot output from S-Video out jack/Component out jacks during HDMI Output. When the HDMI output setting is "Off", this set outputs picture signals as follows according to the HDMI Setting in the Setup Menu. When HDMI Output setting is "Off", HDMI output does not function. When the Output setting is "Interlace": Picture from VCR is output from the Video out jack Picture from the DVD is output from the S-Video out jack/Component out jacks When Output setting is "Progressive": Picture from VCR is output from the Video out jack NO OUTPUT from the S-Video out jack Picture from the DVD is output from the Component out jacks Notes: • When in DVD Mode/outputting HDMI signal, it is impossible to output any video images from either the Video out jack/S-Video out jack/Component out jacks. If the viewer would like to view videos using the Video out jack/S-Video out jack/Component out jacks, then the HDMI output must set to "Off" by pressing the HDMI button on the remote control. • When the HDMI Cable is connected, if the HDMI is pressed or the VCR Mode is switched to DVD Mode, there is a possibility that the monitor will not show any output images. In this case, turn off the HDMI mode. Deactivate HDMI output with HDMI (For details, please refer to "Switching the video quality (HDMI mode) using HDMI button on the remote control" ). • Refer to the Owner's manual of the connected TV as well. • When connecting the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • If you have an HDMI (with HDCP) equipped monitor or display, you can connect it to the DVD/VCR using the HDMI cable. • The HDMI connector outputs uncompressed digital video as well as almost every kind of digital audio that the DVD/VCR is compatible with, including DVD-Video, Video CD, Audio CD and MP3/WMA/JPEG/DivX® files. • No sound will be output from the HDMI cable if the "Digital Out" is not set to "PCM" $% . 23 2I40301A-En_p18-27 23 21/3/06, 9:42 AM