Toshiba SD2815 Owners Manual - Page 25
Reference, Troubleshooting
View all Toshiba SD2815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
REFERENCE Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. Cause z The power cord is disconnected. The power is on, but the DVD player does not work. No picture. z No disc is inserted. z The TV is not set to receive DVD signal output. No sound. z The video cable is not connected securely. z The connected TV power is turned off. z The equipment connected with the audio cable is not set to receive DVD signal output. z The audio cables are not connected securely. z The power of the equipment connected with the audio cable is turned off. z The Digital Audio Output is set to the wrong position. The playback picture is poor. The DVD player does not start playback. z The disc is dirty. z No disc is inserted. z An unplayable disc is inserted. z The disc is placed upside down. z The disc is not placed within the guide. z The disc is dirty. z The Rating level is set. The remote control does not work properly. z The remote control is not pointed at the remote sensor of the DVD player. z The remote control is too far from the DVD player. z There is an obstacle in the path of the remote control and the DVD player. z The batteries in the remote control are exhausted. Correction z Plug the power cord into the wall outlet securely. z Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) z Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. z Connect the video cable into the jacks securely. z Turn on the TV. z Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. z Connect the audio cable into the jacks securely. z Turn on the equipment connected with the audio cable. z Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. z Clean the disc. z Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) z Insert a playable disc. (Check the disc type, color system and Regional code.) z Place the disc with the playback side down. z Place the disc on the disc tray correctly inside the guide. z Clean the disc. z Cancel the Rating function or change the rating level. z Point the remote control at the remote sensor of the DVD player. z Operate the remote control within about 23 ft (7 m). z Remove the obstacle. z Replace the batteries with new ones. 1-27