Toshiba SDK750 User Manual - Page 38
Troubleshooting guide
View all Toshiba SDK750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Others Troubleshooting guide Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction Page No power. • The power plug is disconnected. • Connect the power plug securely into the wall outlet. 14 No picture. • The TV is not set to receive DVD signal • Select the appropriate video input mode output. on the TV so the picture from the DVD - video player appears on the TV screen. No picture, or the screen is blurred or divided into two parts. • The video cable is not connected securely. • Connect the video cable securely into the appropriate jacks. 14, 15 • The output setting is not set correctly. • Set the output setting to the appropriate mode. 35 • The output setting is set to the • Set the output setting to the Interlace Progressive mode though the unit is connected to a TV via the VIDEO out or mode. 35 the S-VIDEO out jack. No sound. • The equipment connected with the audio • Select the correct input mode of the cable is not set to receive DVD signal output. audio receiver so you can listen to the - sound from the DVD video player. • The audio cable is not connected securely. • Connect the audio cable securely into the appropriate jacks. 14~17 • The audio receiver or TV is turned off. • Turn on the equipment connected with the audio cable. - • The unit is in the advanced playback mode. • Resume the normal playback. 20 The playback picture has occasional distortion. • The disc is dirty. • It is in fast forward or fast reverse playback. • Eject the disc and clean it. 7 • Sometimes a small amount of picture distortion may appear. This is not a - malfunction. Brightness is unstable or noises are present in the playback pictures. The DVD video player does not start playback. • The effect of copy protection. • No disc is inserted. • An unplayable disc is inserted. • Connect the DVD video player directly to the TV. Avoid connecting the DVD video 14 player to a VCR or TV/VCR combination. • Insert a disc. 18 • Insert a playable disc. (Check the disc type and color system.) 8 • The disc is placed upside down. • Place the disc with the playback side down. 18 • The disc is not placed within the guide. • Place the disc correctly inside the guide on the disc tray. 18 • The disc is dirty. • Clean the disc. 7 • The parental lock function is set. • Cancel the parental lock function or change the parental lock level. 35 • appears on the screen. • The function is prohibited with the unit or the disc. 8 Playback does not follow the • It is in the mode of repeat playback, course of the disc's program. program playback, etc. • These operations may prevent a proper progress of the contents. - Buttons do not work. • Power supply fluctuations or other • Turn the power on or off with ON/ abnormalities such as static electricity may STANDBY. interrupt correct operations. Or disconnect the power plug and insert - it into the wall outlet again. The remote control does not • The remote control is not pointed at the work properly. remote sensor of the DVD video player. • Point the remote control at the remote sensor of the DVD video player. 13 • The remote control is too far from the DVD • Operate the remote control within approx. video player. 7 m. 13 • The batteries in the remote control are exhausted. • Replace the batteries with new ones. 13 38 2F10101A [E] P36-39 38 1/18/05, 6:38 PM