Toshiba Satellite 2415-S206 User Guide - Page 51
Removing a memory module, Warning: Resume Failure, Press Any Key To Continue
View all Toshiba Satellite 2415-S206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Getting Started Installing additional memory (optional) 51 Removing a memory module CAUTION: If you use the computer for a long time, the memory modules will become hot. If this happens, let the modules cool to room temperature before you replace them. 1 Follow steps 1 through 6 in "Installing additional memory (optional)" on page 46. CAUTIONS: Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved. The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for five seconds, then turn the power on again. 2 Push the latches to the outside to release the module. A spring will force one end of the module up.