Toshiba Satellite 2455-S305 Satellite 2455-S305/S306 User's Guide (PDF) - Page 61
CAUTION: To avoid damaging the computer's screws, use a, DVD-ROM or multi-function drive power is on.
View all Toshiba Satellite 2455-S305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Getting Started Installing additional memory (optional) 61 CAUTION: Do not try to install a memory module under the following conditions. You can damage the computer and the module. 1. The computer is turned on. 2. The computer was shut down using Standby mode. 3. Power to the DVD-ROM or multi-function drive has been turned on. CAUTION: Do not install or remove a memory module while the DVD-ROM or multi-function drive power is on. You will need a standard Phillips No.1 screwdriver and a small flat-head screwdriver to install a memory module. CAUTION: To avoid damaging the computer's screws, use a standard Phillips screwdriver that is in good condition. 1 If the computer is on, turn it off. See "Turn Off or Shut down command" on page 102. 2 Unplug and remove any cables connected to the computer. 3 Open the display panel and remove the panel above the keyboard that contains the power and TOSHIBA Console buttons. CAUTION: When removing the computer's power and TOSHIBA Console button panel to install additional memory, be careful not to damage the display or circuit board.