Toshiba Satellite 4000CDT User Guide - Page 188
Changing the master and user passwords in System Setup, The System Setup screen appears.
View all Toshiba Satellite 4000CDT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
188 Keeping Your Files Safe Hard disk drive passwords 4 Press the spacebar to select Master + User password mode. 5 Press an arrow key to move to the Master Password section. You must register a Master Password first. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered for both User and Master passwords. If the two passwords do not match, an error message appears. Repeat step 6 and step 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, press Y. Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: "Check system, Then press [F1] key," press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Use the up and down arrow keys to select the password you wish to change.