Toshiba Satellite A100 Maintenance Manual - Page 187
Display Assembly, Replacement Procedures, CAUTION
View all Toshiba Satellite A100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
4 Replacement Procedures 4.7 Display Assembly 4.7 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-19, 4-20. 1. Turn the computer so the back is facing you and remove two M2.5x5 black flat-head screws. 2. Restore the normal computer placement and open the display panel. Figure 4-19 Removing the screws from the back of the computer 3. Disconnect the LCD/FL cable from CN3 on the system board. 4. Remove four M2.5x5 black flat-head screws securing the LCD module to the top cover. 5. Remove the wireless antenna cables from the top cover. 6. Remove the display module. 4-34 Satellite A100/A105 / TECRA A7 Maintenance Manual