Toshiba Satellite A105-S2011 User Manual - Page 217
Start, Control Panel, Network Connections, Properties, Internet Protocol TCP/IP, Obtain an IP
View all Toshiba Satellite A105-S2011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
217 If Something Goes Wrong Resolving a hardware conflict ❖ Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows®, and that the driver is loaded. Carefully note any error messages- these will be very helpful if you should confer with a support technician at a later time. ❖ Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: 1 Click Start, Control Panel. 2 Double-click Network Connections. 3 Right-click the name of your wireless network connection, then click Properties. 4 Select Internet Protocol (TCP/IP), then click Properties. 5 Select Obtain an IP address automatically. 6 Click OK, then click Close. ❖ Use IPCONFIG to verify that the computer has a useful IP address-one other than the private address of 169.254.xxx.xxx assigned by Windows. ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter "IPCONFIG /ALL" and press Enter. ❖ The IP address for each active network adapter will be displayed. ❖ Connect your computer directly to your router or broadband modem, by plugging a standard CAT5 Ethernet patch cable (sold separately) into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the Wi-Fi part of your network.