Toshiba Satellite M30X Maintenance Manual - Page 23
System Unit, Hardware Overview, Supports PCI PME# from D3, D2, D1 and D0 - 144
View all Toshiba Satellite M30X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1.2 System Unit 1 Hardware Overview • - Contain two 512-byte buffer to maximize the transfer speed • - Support Traffic LED Light • - Support Over Current Protection ENE CB1410 Card Bus Host Adapter • Cardbus Controller Datasheet • 3.3V operation with 5V tolerance • 208-pin LQFP package or 209-ball LFBGA for CB1420 dual slot Cardbus controller • 144-pin LQFP or 144-ball LFBGA package for CB1410 single slot Cardbus controller • Compliant with • PCI Local Bus Specification, Revision 2.2 • PCI Bus Power Management Interface Specification, Revision 1.1 • PCI Mobile Design Guide, Version 1.1 • Advanced Configuration and Power Interface Specification, Revision 1.0 • PC 99 System Design Guide • PC Card Standard 8.0 • Interrupt configuration • Supports parallel PCI interrupts • Supports parallel IRQ and parallel PCI interrupts • Supports serialized IRQ and parallel PCI interrupts • Supports serialized IRQ and PCI interrupts • Power Management Control Logic • Supports CLKRUN# protocol • Supports SUSPEND# • Supports PCI PME# from D3, D2, D1 and D0 • Supports PCI PME# from D3Cold • Supports D3STATE# (CB1410 only) • Power Switch Interface • CB1420 supports serial 3 wire power switch interface. • CB1410 supports parallel 4 wire power switch interface. • Misc Control Logic Satellite M30X Series Maintenance Manual 1-9