Toshiba Satellite P100-ST7111 User Manual - Page 57
If no memory slot is available, you must remove a module by, performing steps
View all Toshiba Satellite P100-ST7111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Getting Started Adding memory (optional) 57 NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 45. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket 12 Firmly press the memory module into the memory slot's socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket 13 Once the module's connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should "snap" into place securely with the