Toshiba Satellite P205-S6287 Toshiba Online User's Guide for Satellite P200/P2 - Page 51
removing/installing the bottom module., If your system has the memory modules stacked on top of one
View all Toshiba Satellite P205-S6287 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Getting Started 51 Adding memory (optional) NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 53. NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket 12 Firmly press the memory module into the memory slot's socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket