Toshiba Satellite Pro A300 PSAGDA-01D00R Users Manual AU/NZ - Page 202
CONNECT, CARRIER, Phone and Modem, Options
View all Toshiba Satellite Pro A300 PSAGDA-01D00R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Troubleshooting Modem Problem Procedure Communication Make sure the computer's internal modem software can't initialize settings are correct. Refer to Phone and Modem modem Options in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can't make a call sure the communication application's tone dial detection feature is disabled. You place a call, but a connection can't be made You can also use the ATX command. Make sure the settings are correct in your communications application. After making a call you Make sure the tone or pulse selection in your can't hear a ring communications application is set correctly. You can also use the ATD command. Refer to the chapter on AT commands in online help files for Appendix C, AT Command. Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. A CONNECT display is Check the error control setting in your quickly replaced by NO communications application. CARRIER You can also use the AT\N command. Character display In data transmission, make sure the parity bit and becomes garbled during stop bit settings correspond with those of the a communication remote computer. Check the flow control and communication protocol. You cannot receive an Check the rings before auto answer setting in an incoming call incoming call your communications application. You can also use the ATS0 command. If problems persist, contact your dealer. User's Manual 9-17