Toshiba Satellite Pro A50 PS575C Users Manual Canada; English - Page 86
LAN, 100BASE-TX or Gigabit Ethernet LAN 1000 megabits per second
View all Toshiba Satellite Pro A50 PS575C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
8. Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them. Do not touch the connectors on the memory module or on the computer. Debris on the connectors might cause memory access problems. Figure 4-13 Removing the memory module 1 1 LAN 1. Latches 9. Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. 10. Install the battery pack. 11. Turn your computer over. 12. Connect the AC adaptor and turn the computer on. The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to a LAN. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). User's Manual 4-32