Toshiba Satellite R10 User Guide - Page 191
Deleting or changing a hard disk drive user only password in System Setup, HDD PASSWORD, User Only
View all Toshiba Satellite R10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
191 Keeping Your Files Safe Using passwords in the Windows® operating system illuminates (green) for approximately one second. When the following message appears on the screen: "Check system, Then press [F1] key," press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar to select User Only password mode. 5 Press the down arrow key to move to the User Password section. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat steps 6 and 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Deleting or changing a hard disk drive user only password in System Setup To delete or change a user only password in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When