Toshiba TDP-P75 User Manual - Page 34
Default setting menu, Projection, Auto input, search, Language, Start-up, screen, Fan mode - user manual
View all Toshiba TDP-P75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English 3. Default setting menu FUNCTION Projection mode Auto input search Language Start-up screen Fan mode Power on DESCRIPTION The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. Contact your dealer for the ceiling mount bracket (optional accessory) if you need to install the projector on your ceiling. For more information, refer to p.22 . Sets whether the projector searches automatically for input signals. If the source scan is on, the projector will scan for input signals until it acquires a signal. If the function is not activated, the projector selects the last used input signal. Language sets the language for the OSD control menus. Use 3/ 4button on the projector or remote control to select your desired language from among English, French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese, and Korean. Enables the user to select which logo screen will appear during projector start-up. Three modes are available: Default (Toshiba logo), black screen or blue screen. A mode used for extreme environments like high altitude. We recommend you set High when your environment is higher than 3000 feet above sea level. Press 3 or 4button on the projector or remote control to select. Operation under high fan mode may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance. If you use this projector under other extreme environments excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High fan mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme environments. Set whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). 34 Operation