Toshiba TDP-T3 Owners Manual - Page 13
does not have a 15-pin connector - cable
View all Toshiba TDP-T3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting up the Projector NOTE: Before you continue, make sure the projector is unplugged and your equipment is turned off. If you're connecting a computer, make sure the distance between it and the projector is 6 feet or less. computer Audio in S-video composite video FIGURE 5 Connector panel NOTE: The enhanced connectivity module is an optional accessory that provides RS-232, component video, VESA computer, M1 computer, and monitor loop through capabilities. Contact your Toshiba dealer to order. computer computer 1-M1 audio in component video wired remote RS-232 computer 2-VESA computer audio in audio in composite video S-video (for all video sources) monitor FIGURE 6 Connector panel on optional enhanced connectivity module NOTE: If you are connecting an older Macintosh computer that does not have a 15-pin connector, you must use a Mac adaptor between the computer and the projector. The Mac adapter will only work with the 1024x768 resolution. Please set your Mac's 6 video card accordingly. to USB mouse to computer video to computer FIGURE 7 Computer cable to projector