Toshiba TDP-TW100U User Manual - Page 17
Operations
View all Toshiba TDP-TW100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using handy features (Continued) ■ Changing screen size The screen size for the projected image can be changed. Press the remote control's SCREEN SIZE button. Pressing the button switches Full/Thru/Wide in turn. Notes • Thru display is available for computer-input images. • [Screen size] of the Display setting menu has the same function p.38 . • If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. ■ Freezing the image (Freeze) The image being projected can be frozen. This function is to be used to pause a video during a presentation, etc. Press the remote control's FREEZE button. The picture pauses. (The Freeze function is released when pressing the FREEZE button again.) Notes • The icon will appear while freeze is in effect. • Other operation will also release the freeze. • Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. Remote Control Remote Control 32 ■ Password function When the password function is added and [Password] is set to [On], image projection requires an entry of the preset password at power-on. To add the password function, perform the following procedure: (The password function, once added, cannot be deleted. Set [Password] to [Off] if you do not want to use it after addition.) Notes: • This password is different from that for the wireless LAN. • When adding the password function, switch the input to other than Wireless or USB. How to add password 1 Set the projector to the operating status or the standby mode. 2 Select and hold the button until the LAMP, TEMP, and FAN indicators light in orange. The password function is added when the steps up to here have been completed. It is also added to the Default setting menu. How to set password (from [Off] to [On]) 1 Select [Password] in the Default setting menu and press the or button. The password setting confirmation screen is displayed. ([OK] or [Cancel]) 2 Select [On] and press the button. The password entry screen is displayed. 3 Enter a four-digit number for the password using numeric keys of the remote control. The input number appears as [****]. 4 Re-enter the same password for confirmation. When the password is confirmed, the setting is complete and the password becomes [On]. If the password is wrong, repeat the procedure from step 2 . How to operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode. 33 Operations