Toshiba TLP-451U Owners Manual - Page 23

Operations (Continued) AUTO SET AUTO SET ON/STANDBY KEYSTONE MARKER POINTER PJ LASER 2) Press MUTE again. The picture is also cut off temporarily. " " appears. To restore, press MUTE again. Note If you press MUTE while the menu is displayed, the menu disappears. CONTENTS 23 Contents of displayed items [ St atus ] I n p u t : RGB S i g n a l : XGA6 0 Sc r e e n : XGA6 0 Synch ro . :N/N Ve r . / r ev . : V01 /R01 L-CLICK MENU R-CLICK ENTER RGB VIDEO CAMERA RESIZE RESET FREEZE MUTE CALL FREEZE CALL MUTE Adjusting the image automatically An image which is flickering, blurred or is not centered, can be adjusted automatically. Press AUTO SET. The image is adjusted automatically. To adjust further, make the "Image" adjustment on the menu. 31 Cutting off the picture and sound temporarily 1) Press MUTE. The sound is cut off temporarily. " " appears. Freezing the picture Press FREEZE. The picture freezes. " " mark appears on the screen. To release the picture, press FREEZE again. Any other operations can also release the picture. Note This function is convenient for the case where you are using the document imaging camera model and change documents to project through the camera. Displaying the input source information Press CALL. The current input source and the signal status information is displayed. To close the display, press CALL again. Current input source Signal system of the input source Signal system automatically detected by the projector (Mode determination 45 ) Synchronizing polarity of input signal P=Positive N=Negative Version number of software Note If you press CALL while the menu is displayed, the menu disappears. (Continued)