Toshiba TLP-T70MU Owners Manual - Page 25
CONTROL terminal, Separately Sold Product
![]() |
View all Toshiba TLP-T70MU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Specifications (Continued) I CONTROL terminal G Pin assignment 7 8 6 5 3 4 21 Mini DIN 8 pin connector Pin No. 1 2 3 4 5 6 7 8 Signal Name RXD CTS DSR GND RTS N.C TXD N.C Description Receiving data Consent to send Data set ready Signal ground Request to send No connection Sending data No connection G Interface format 1 Communication method 2 Communication format 3 Data format RS-232C, 9600bps, No Parity, Data Length: 8 bits; Stop Bit Length: 1 bit STX (02h) Command (3Byte) ETX (03h) Only 1 command valid per communication. For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended ACK (06h) ESC (1Bh) ... Aborted No acknowledge NAK (15h) If commands are to be sent consecutively, wait for the response from the projector before sending the next command. G Main Commands Item Power on Power off Icon display on Icon display off Auto setting (RGB input) Status display on Status display off Command PON POF MO0 MO1 PAT DON DOF Item Computer input select Y/PB/PR input select Video input select S-video input select Camera input select Command IN1 IN2 IN3 IN4 IN5 Note • Contact your dealer for control cable and other commands. I Separately Sold Product Replacement Lamp Model TLPLV2 Note • Design, specifications, etc. subject to change without notice for improvements, etc. 48
![](/manual_guide/products/toshiba-tlpt70mu-owners-manual-27f9f9b/25.png)