Toshiba Tecra A11 PTSE1A-07G005 Users Manual AU/NZ - Page 176
Password, Keyboard, Real Time Clock
View all Toshiba Tecra A11 PTSE1A-07G005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Troubleshooting Real Time Clock Problem Procedure The following message The charge in the Real Time Clock (RTC) battery is Displayed on the has run out - you will need to set the date and screen: time in the BIOS setup application by using the RTC Power following steps: Failure. 1. Turn on the computer while pressing the F2 Check system. key. Then press [F2] key. 1. Release the F2 key when the TOSHIBA Leading Innovation >>> screen appears - the BIOS setup application will load. 2. Set the date in the System Date field. 3. Set the time in the System Time field. 4. Press F10 - a confirmation message will be displayed. 5. Press the Y key - the BIOS setup application will end and the computer will restart. Password Problem Procedure Cannot enter password Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and Power-Up Modes for further information. Keyboard Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Some letter keys produce numbers Output to screen is garbled Procedure Check that the numeric keypad overlay is not activated - press the FN + F11 hot key and try typing again. Please refer to your software's documentation to ensure that its is not remapping the keyboard in any way (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact your reseller, dealer or service provider. User's Manual 8-7