Toshiba Tecra A2-S219 User Guide - Page 58
Sample removing the memory module slot cover, until the clips snap into place.
View all Toshiba Tecra A2-S219 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
58 Getting Started Adding memory Memory module slot cover Sample removing the memory module slot cover 7 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer. 8 Remove the new memory module from its antistatic packaging. 9 Holding the memory module by its edges so that the gold connector bar faces the slot, fit the module into the socket. 10 Gently press down on the memory module connector until the clips snap into place. Do not force the memory module into position. The memory module should be level when secured in place.