Toshiba Tecra A40-C1440 Tecra A40/C40-C Series Windows 10 Users Guide - Page 169
Enabling/Disabling USB Sleep and Charge on, Sleep Utilities
View all Toshiba Tecra A40-C1440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
169 If Something Goes Wrong Develop good computing habits 3 Install one item of hardware or software. 4 Restart the Windows operating system. 5 Use the new hardware or software for a while, noting any new problems. Make sure that your critical applications (email, business applications, etc.) are working correctly, and verify that important devices are still functioning. 6 For each additional hardware or software item, repeat these steps, starting at step 1 if any of your critical data has changed, or starting at step 2 if no critical data has changed. USB Sleep and Charge is not working. USB Sleep and Charge may be disabled. Open the TOSHIBA Sleep and Charge utility from the System Settings window to check if the feature is disabled and to enable it if necessary. See "Sleep Utilities" on page 117. ❖ Make sure that the device you want to charge is connected to a port that supports the USB Sleep and Charge function. Ports that support this feature are identified with the ( ) icon. ❖ USB Sleep and Charge may be disabled. Open the TOSHIBA Sleep and Charge utility from the System Settings window (see "Sleep Utilities" on page 117) to check if the feature is disabled and to enable it if necessary. For more information, see "Enabling/Disabling USB Sleep and Charge" on page 119. ❖ Try selecting a different charging mode in the TOSHIBA Sleep and Charge utility (see "Sleep Utilities" on page 117), if your computer provides more than one charging mode. For more information, see "Power supply mode settings" on page 119. ❖ If you are attempting to charge a device without an AC adaptor connected to the computer, the computer's battery power may be below the limit specified in the TOSHIBA Sleep utility or the battery may be depleted. Lower the limit in the Sleep and Charge utility to enable charging at the current battery power level, or, if battery power is running low or is depleted, connect the AC adaptor to your computer. For more information, see "Power supply mode settings" on page 119.