Toshiba Tecra A50-C PS57BC-00T006 Users Manual Canada; English - Page 85
Removing a memory module, Control Panel ->, System and Security -> System, Windows System
View all Toshiba Tecra A50-C PS57BC-00T006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
8. Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. Figure 4-12 Seating the memory module cover 2 1 1. Memory module cover 2. Screw 9. Install the battery pack. 10. Turn your computer over. 11. Connect the AC adaptor and turn on the computer. Make sure that the added memory is recognized. To confirmed it, click Control Panel -> System and Security -> System under Windows System group in All apps. Removing a memory module To remove the memory module, do the following: 1. Click Start -> Power and then click Shut down while holding down the SHIFT key. Ensure that the Power indicator is off. 2. Remove the AC adaptor, all cables, and peripherals connected to the computer. 3. Close the display panel. 4. Turn the computer upside down and remove the battery pack. 5. Loosen the screw securing the memory module cover in place. Note that the screw is attached to the cover in order to prevent it from being lost. 6. Slide your fingernail or a thin object under the cover and lift it off. 7. Push the latches away from the module in order to release it. A spring forces one end of the module up at an angle. User's Manual 4-31