Toshiba Tecra A6 PTA61C-CV501E Users Manual Canada; English - Page 148
Installing a memory module, Slide your fingernail or a thin object under the cover and lift it off.
View all Toshiba Tecra A6 PTA61C-CV501E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Optional Devices Installing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1. Set the computer to boot mode and turn off the power. Do not try to install a memory module under the following conditions. You can damage the computer and the module. a. The computer is turned on. b. The computer was shut down using the Stand by mode. c. Power to the optical disc drive has been turned on by the CD Power switch. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery, refer to Chapter 6, Power and Power-Up Modes. 4. Loosen the one screw securing the memory module socket cover. 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. 8-8 TECRA A6