Toshiba Tecra A7-ST5112 Resource Guide for Tecra A7 - Page 28
Firmly press the memory module into the memory slot's
View all Toshiba Tecra A7-ST5112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 Adding memory (optional) If your system has the memory modules stacked on top of one another, you must remove the top module before removing/installing the bottom module. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket 12 Firmly press the memory module into the memory slot's socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket
28
Adding memory (optional)
If your system has the memory modules stacked on top of one
another, you must remove the top module before removing/installing
the bottom module.
11
Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector’s notch with the
matching key in the socket.
(Sample Illustration) Aligning the memory module with the socket
12
Firmly press the memory module into the memory slot’s
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the socket
latch
latch
key
notch
connector