Toshiba Tecra M9-S5512X User Guide - Page 199
Special considerations for the Windows, operating system
View all Toshiba Tecra M9-S5512X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
If Something Goes Wrong Resolving a hardware conflict 199 ❖ Enter IPCONFIG /ALL and press Enter. ❖ The IP address for each active network adapter will be displayed. ❖ Connect your computer directly to your router or broadband modem, by plugging a standard CAT5 Ethernet patch cable (sold separately) into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the Wi-Fi® part of your network. ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and press Enter. ❖ If "Request Timed Out" or another error message appears in response, then the problem is probably Wi-Fi®-related. ❖ If you have enabled any security provisions (closed system, MAC address filtering, Wired Equivalent Privacy [WEP], etc.), check the access point vendor's Web site for recent firmware upgrades. Problems with WEP keys, in particular, are frequently addressed in new firmware releases. Special considerations for the Windows® operating system Wired Equivalent Privacy (WEP) encryption is not enabled on the wireless access point. When you install a wireless access point device, the Windows® operating system checks whether WEP encryption is enabled on the device. If it is not enabled, the Windows® operating system adds the device to its list of available wireless networks, but does not create a wireless connection using the device, since the connection would not be secure. You can still, however, use the access point. To use an access point without WEP encryption, follow these steps: 1 Right-click the Wireless Network icon in the System Tray (far-right portion of the Windows® Taskbar). 2 Click View Available Wireless Networks. 3 Select Allow me to connect to the selected wireless network, even though it is not secure. 4 The Windows® operating system will now try to establish a wireless connection.