Toshiba W50-A PT640C-00Y003 Users Manual Canada; English - Page 131
If something goes wrong, Hardware, Start, Task Manager, Applications, End Task
View all Toshiba W50-A PT640C-00Y003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Hardware If you cannot find a software problem, you should then check the setup and configuration of your hardware. First run through the items in the preliminary checklist as described previously then, if you still cannot correct the problem, try to identify the source - the next section provides checklists for individual components and peripherals. Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer. If something goes wrong Your computer does not respond to the keyboard commands If an error occurs and the computer does not respond to your keyboard commands, follow the steps below: Press the power button and hold it down for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. Your program stops responding If you are working with a program that suddenly freezes all operations, chances are the program has stopped responding. You can exit the failed program without shutting down the operating system or closing other programs. To close a program that has stopped responding: 1. Press CTRL, ALT, and DEL simultaneously (once), then click Start Task Manager. The Windows Task Manager window appears. 2. Click the Applications tab. If a program has stopped responding, the words "not responding" appear beside its name in the list. 3. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. 4. Close the remaining programs one by one by selecting the program name, then End Task. Closing all programs should allow you to continue working. If it does not, power off your computer and then restart it. The computer will not start Make sure you attached the AC adaptor and power cord/cable properly. User's Manual 6-3