Toshiba W522 Owners Manual - Page 11

PREPARATION PREPARATION How to Use the Remote Control This section explains how to get ready for remote control operation. Setting up the Remote Control 1 Open the battery compartment lid on the rear panel. 2 Install 2 batteries ("AA" size) following the polarity diagrams. 3 Close the battery compartment lid. + + 4 Point the remote control at the VCR and press the buttons within the operating range. Distance: within about 7 m from the front of the remote sensor Angles: within about 30˚ in every direction Notes on batteries • The life of the batteries is about 1 year depending on the conditions of use. • If the remote control does not operate correctly, replace all batteries with new ones. • If the remote control is not to be used for a long period of time, remove the batteries to avoid possible damage from battery corrosion. Caring for the remote control • Do not expose the remote sensor of the VCR to a strong light source such as direct sunlight or illumination (especially high-frequency lighting) when using the remote control. • Be careful not to spill water on the remote control or to place it on anything wet, and avoid sharp impacts. 11