Toshiba W525 Owners Manual - Page 15

SETTING THE VIDEO CHANNEL To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel). When a TV is connected with the 75 ohm coaxial cable only. 1 During power off, press and hold the "3" or "4" number button on the remote control for 3 seconds. The "TV/VCR" indicator will flash 4 times. 2 Turn ON the VCR POWER button. 3 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1. 4 Press the TV/VCR selector button to select the VCR position. The TV/VCR indicator will light. CH 125 5 Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds. LANGUAGE SELECTION This VCR can display on the TV screen in the English, Spanish or French languages. CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV. 1 Press the MENU button. Press the TRACKING SET + or - button to select the LANGUAGE option, then press the ENTER button. 2 Press the TRACKING SET + or - button to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button. 3 Press the MENU button until the menu screen is cleared. SETTING THE CLOCK You must set the date and time manually for timer recordings. EXAMPLE: Setting the clock to "8:30 AM" October, 26 (SAT), 2002. CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV. 1 Press the MENU button. Press the TRACKING SET + or - button to select the CLOCK SET option, then press the ENTER button. 4 2 Press the TRACKING SET + or - button to set the month, then press the ENTER button. 3 Set the day, year and time as in Step 2. • The day of the week will automatically appear when you set the year. • Press and hold down the button to increase/ decrease the minute by 10. • After setting, the date and time will start functioning automatically. 12 NOTES: • After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time. • Press the CANCEL button to move cursor backward for correction. • If you want to correct time or date while the clock is functioning, press the MENU button, then press TRACKING SET + or - button to select the CLOCK SET option, then press the ENTER button. To make any adjustments perform steps 2 through 3. 15