Toshiba W701 Owners Manual - Page 21

PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. VCR Basic Playback 123 4 5 6 789 0 100 PLAY/x2 REW FF STOP CH/TRK 2 FF 3 19µ REW DNR 1 Load a recorded cassette. Power is turned on. If the cassette has no safety tab, playback starts automatically. 2 Press PLAY/x2 to start playback. 3 To stop playback, press STOP. Rewinding / Fast-forwarding Press REW or FF in the stop mode. POWER POWER S P VCR DT PLAYBACK Adjusting the tracking When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound (Digital Auto Tracking). The "DT" indicator blinks during the adjusting. If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the tracking manually. • To resume the digital auto tracking, hold down both CHANNEL on the VCR simultaneously for about 2 seconds. Notes • During the adjusting, the playback picture and sound may be distorted. • The digital auto tracking is activated only in the playback mode. • To reset the manual tracking point to the center, press both CHANNEL on the VCR simultaneously for not longer than 1 second. • The noise on the screen may not be completely eliminated depending on the tape used, especially when the tape was recorded on another VCR. 19µ HEAD You can view high quality pictures while playing back a tape recorded in the SLP tape speed. By pressing 19µ repeatedly, the 19µ HEAD mode is displayed on the TV screen as follows: 19U HEAD AUTO: Usually set to "AUTO". As the playback starts, the VCR automatically activates the 19µ head and reproduces high quality pictures. 19U HEAD OFF: Set to "OFF" if the pictures are marred by dots. Note During playback with the 19µ head, momentary noises or shakes may be produced when you change the mode to the picture search or variable speed playback. DNR (Digital Noise Reduction) (For W-708 only) The noise reduction function of this VCR is based on a digital signal system utilizing memory, and is effective in the playback of noisy tapes. Furthermore the CSE (Color Signal Enhancement) circuit, which is included in the system, compensates for color signal weakness and gives the best possible color. Thanks to this circuit color distortion is reduced and a sharp picture is played back. Press DNR repeatedly to select the following: DnR On: Usually set to "On". The "DnR On" will appear on the TV screen and you can view the picture with less noise. DnR OFF: This function will not work. Notes • The DNR playback is available only in the playback mode. • Depending on the recorded picture, for example too vivid or too noisy, you may not notice a reduction in the noise. • The noise reduction may not work on pictures recorded from special equipment such as TV game machines or computers. 21