Toshiba W705 Owners Manual - Page 38
Before Calling Service Personnel
View all Toshiba W705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
ADDITIONAL INFORMATION Before Calling Service Personnel Check the following symptoms before requesting servicing. No power. • The power cord is not plugged in. - Plug the power cord into the outlet firmly. Although the power is on, the VCR will not work. • There is no cassette. - Load a cassette. (page 20) The clock does not work. • There has been a power failure. - Reset the clock. (page 16) The timer does not work properly. • The time is incorrect. - Set the clock correctly. (page 16) The picture does not appear on the TV screen. • The video channel or video input mode is not set correctly. - Set the TV channel to the video channel (3 or 4) or set the video input mode on the TV. (page 11) • The TV signal is weak. - Adjust the antenna direction or use an optional antenna booster. • The power cord is not plugged in. - Plug the power cord into the outlet firmly. The picture does not appear on the TV screen during recording and playback. • The video channel or VCR mode is not set correctly. - Press TV/VCR to select the VCR mode and set the TV channel to 3 or 4. (pages 11, 26) The VCR does not record. • The loaded cassette has no safety tab. - Use a cassette with a safety tab or cover the hole with adhesive tape. (page 20) The playback picture is poor. • Tracking is not set appropriately. - Adjust the tracking manually. (page 21) • The video heads are dirty. - Clean the video heads with a commercially available cleaning tape. The desired sound is not heard, such as SAP, stereo, or regular sound. • Setting of sounds is not correct. - Select a desired sound using A.SELECT. (page 34) Noise is present in the Hi-Fi sound being played. • Tracking is not set appropriately. - Adjust the tracking manually. (page 21) The timer recording function does not work. • There is an error in programming. - Reset the timer recording program. (page 27) • There is no cassette in the VCR. - Load a cassette with the safety tab attached. (page 20) • The cassette does not have the safety tab. - Use another cassette with a safety tab or cover the hole with adhesive tape. (page 20) • The timer indicator is not displayed. - Press both TIMER simultaneously. (page 28) • There has been a power failure. - Reset the clock. (page 16) • The cable box is not turned on. - Turn on the cable box. The VCR Plus+® system recording cannot be done. • The guide channel numbers are not set up correctly. - Make the guide channel number setting. (page 30) • The cable box is not turned on when the channel comes in the VCR via the cable box. - Turn on the cable box. • The timer indicator is not displayed. - Press both TIMER simultaneously. (page 33) 38