Toshiba W727 Owners Manual - Page 19

PLAYBACK PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Basic Playback POWER 1 Load a recorded cassette. TIMER VCR TV Power is turned on. CH/TRK SLP S 123 CH/TRK If the cassette has no safety tab, VCR REC L 456 playback starts automatically. TV VOL 789 I.SELECT 0 100 REMAIN/ DISPLAY COUNTER COUNT RESET TV/ VCR 2 Press PLAY/x2 to start playback. TIMER SP/ SLP REC TIMER SLOW PLAY/x2 PAUSE /STILL FF VCR REC L CURSOR REW FF STOP 2,3 3 To stop playback, press STOP. PROG. CANCEL ENTER VCR Plus+ A.SELECT CABLE BOX CH EJECT CM SKIP POWER REW VCR Double Speed Playback 1 Press PLAY/x2 during playback. A tape runs at double speed playback. To resume normal playback Press PLAY/x2. Rewinding / Fast-forwarding Press REW or FF on the Remote control, turn REV or FWD on the VCR in the stop mode. Adjusting the tracking When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound (Digital Auto Tracking). If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the tracking manually. Notes • During the adjusting, the playback picture and sound may be distorted. • The digital auto tracking is activated only in the playback mode. • The noise on the screen may not be completely eliminated depending on the tape used, especially when the tape was recorded on another VCR. S-VHS Quasi Playback (SQPB) • This VCR can also play back at tape which is recorded in S-VHS format. But the playback pictures does not have the same quality and resolution as the original S-VHS playback picture. • This VCR cannot record in S-VHS format. • SQPB is an abbreviation for S-VHS Quasi Playback. 19