Toshiba X100 User Guide - Page 18
Inserting and removing an SD™ Card (optional) - battery life
View all Toshiba X100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Getting Started Inserting and removing an SD™ Card (optional) ❖ The battery pack is lithium ion batteries, which can explode if not replaced, used, handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ❖ Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. ❖ Never install or remove the battery pack without first turning off the power and disconnecting the AC adaptor. Inserting and removing an SD™ Card (optional) Your camcorder comes with internal memory that allows you to store pictures and movies. You can expand the memory capacity by using an optional SD™/SDHC memory card. 1 Insert the memory card into the slot until it locks in place as shown below. 2 To remove an installed SD™ card, gently press the card inward to release it. The card pops out slightly. 3 Grasp the card and pull it straight out. (Sample Illustration) Inserting and removing an SD™ Card NOTE When a memory card is inserted, movies and pictures are saved onto the card rather than the built-in memory.