Toshiba X70-AST3G26 User Guide - Page 50
you can retrieve them later., Static electricity can damage the memory module.
View all Toshiba X70-AST3G26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
50 Getting Started Adding memory (optional) Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Sleep or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Sleep configuration will not be saved. 6 Place a soft cloth on the work surface to prevent scratching the top cover of the computer, and then place the computer upside down on the cloth. 7 Remove the main battery. For information on removing the battery, see "Removing the battery from the computer" on page 100. NOTE To locate your memory module slot cover, please refer to your Quick Start document. 8 Using a small Phillips screwdriver, loosen the captive screw(s) that secure the memory module slot cover. 9 Remove the memory module slot cover. 10 Place the screw(s) and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 11 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 12 Locate an empty memory module slot on the underside of the computer.