Home » Toshiba Manuals » PDAs » Toshiba e800 » Manual Viewer

Toshiba e800 User Guide - Page 93

Pocket Internet Explorer

Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Chapter 6: Pocket Internet Explorer Chapter 6: Pocket Internet Explorer Use Microsoft® Pocket Internet Explorer to view Web or WAP pages in either of these ways: • During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer. • Connect to an Internet service provider (ISP) or network and browse the Web. To do this, you'll need to create the connection first, as described in Chapter 7. When connected to an ISP or network, you can also download files and programs from the Internet or intranet. To switch to Pocket Internet Explorer, tap and then Internet Explorer. The Mobile Favorites Folder Favorites are stored in the Mobile Favorites subfolder of Favorites in Internet Explorer on your PC. This folder was created when you selected the Favorites information type for synchronization in ActiveSync on your PC. Favorites must be stored in this folder to be synchronized. Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your PC is synchronized with Pocket Internet Explorer on your device. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your device, and you will need to connect to your ISP or network to view the content. For more information on synchronization, see ActiveSync Help on the PC. Mobile Favorites If you are using Microsoft Internet Explorer 5.0 or later on your desktop computer, you can download mobile favorites to your device. Synchronizing mobile favorites downloads Web content to your device so that you can view pages while you are disconnected from your ISP and desktop computer. 93

Section	Page
Toshiba Pocket PC e800/e805 User's Guide	1
Introduction	2
Copyright Information	2
Safety precautions	3
Safety instructions	3
Limitation of liability	9
Usage conditions for Bluetooth	9
1. These include life-support systems, surgery room equipment, and other medical devices.	9
2. These include the main equipment control systems and safety protection systems at nuclear power facilities, other critical safety systems, fleet transportation operating control systems, and air traffic control systems.	9
Working environment	11
CE compliance	12
FCC Notice “Declaration of Conformity”	12
1. This device may not cause harmful interference	13
2. This device must accept any interference received, including interference that may cause undesired operation.	13
Canadian Regulatory Information (Canada Only)	14
VCCI Notice (Japan Only) Class BITE	14
BSMI Notice (Taiwan Only)	14
FCC Class B Digital Devices & Peripheral Devices (Declaration of Conformity or Certification Authorization)	15
Declaration of Conformity Label & Marking Requirements	15
CHAPTER 1: Getting Started 17	16
CHAPTER 2: Basic Skills 19	16
CHAPTER 3: Microsoft ActiveSync 64	16
CHAPTER 4: Microsoft Pocket Outlook 66	16
CHAPTER 5: Companion Programs 75	16
CHAPTER 6: Pocket Internet Explorer 93	16
CHAPTER 7: Getting Connected 99	16
CHAPTER 8: Wi-Fi Wireless LAN 107	16
CHAPTER 9: TOSHIBA IP Phone for Pocket PC 139	16
CHAPTER 10: Bluetooth 140	16
CHAPTER 11: Optional Functions 161	16
CHAPTER 12: Additional Information 208	16
Chapter 1:	17
Chapter 1: Getting Started	17
Welcome	17
Where to Find Information	18
Chapter 2:	19
Chapter 2: Basic Skills	19
Parts Names and Function	19
Battery Switch	22
To turn on the battery switch:	22
1. Open Switch cover.	22
2. Slide the battery switch to the right.	22
Battery/Alarm LED	22
Wireless Communication Switch	23
1. To enable Wireless module (Wireless LAN/Bluetooth models only), make sure the Wireless Communication Switch is turned on. (Th...	23
2. Select a network. On Windows Mobile 2003, if the switch is turned on, a window will popup to show the list of existing networks you can join.	23
Wireless LED Descriptions	23
Hold Switch	23
How to Use the Stylus	24
About the Cursor Button	24
About the TOSHIBA Scroller	25
Battery Charging	25
How to Charge the Battery	26
How to Attach/Detach the Main Battery Pack	28
1. Turn off the power.	28
2. Switch the Battery Pack Lock to release the battery pack.	28
3. Attach/Detach the battery from the Pocket PC.	28
How to Use the Optional High Capacity Battery Pack	29
1. Detach the Main Battery.	29
2. Attach the High Capacity Battery pack to the Pocket PC.	29
3. Switch the Battery pack Lock to lock the High Capacity Battery pack.	29
Battery Life	30
Battery Charge Level and Stored Data Protection	31
How to Use the Optional Presentation Pack	31
1. Plug the Guide Pins into the corresponding jacks on the Toshiba Pocket PC e800/e805. A light click is heard when the Presentation Pack is locked in place.	32
How to use the Optional USB Host Client Cable	32
To connect a USB keyboard to the Pocket PC:	32
1. Turn off the power.	32
2. Plug the optional USB Host Cable to the Pocket PC.	32
3. Connect a USB keyboard to the USB Port of the optional USB Host Cable.	32
Initial Setup	33
1. Move the battery switch to the “supply” position. The Toshiba Pocket PC e800/e805 powers on automatically and the Welcome screen appears. Tap the screen to start the following setup.	33
2. Execute touch screen correction.	33
3. Read how to use the stylus.	33
4. Learn the pop-up menu operation.	33
5. Set the TIME ZONE.	33
6. To complete the initial setup.	34
Inserting a CF II Card	34
1. Turn off the power.	34
2. Remove the dummy card.	34
3. Insert the CF II Card.	34
1. Turn off the power.	34
2. Lightly press down the release button with the stylus. The button will pop out. Press down on the release button again. The card will withdraw slightly from the slot.	34
3. Pull the card straight up to remove.	35
Inserting an SD Card	35
1. Turn off the power.	35
2. Remove the dummy card.	35
3. Insert the card with its contact surface (metal contact surface) facing the back of the Toshiba Pocket PC e800/e805.	35
4. Press down on the card until it clicks into place.	35
1. Turn off the power.	36
2. Lightly press down the card until a clicking sound is heard. The card will pop out slightly from the slot.	36
3. Pull the card straight up to remove.	36
Connecting to a Computer	36
1. Connect the USB cradle to your computer as shown below.	36
2. Insert the Pocket PC into the cradle.	37
Today Screen	38
Program	39
Navigation Bar and Command Bar	41
Pop-up Menus	42
Notifications	43
Enter Information on Your Toshiba Pocket PC	43
Entering Text Using the Input Panel	43
To type with the soft keyboard:	44
1. Tap the arrow and then Keyboard.	44
2. On the soft keyboard that is displayed, tap the keys with your stylus:	44
To use Letter Recognizer:	44
1. Tap the arrow and then Letter Recognizer.	44
2. Write a letter in the box.	44
To use Block Recognizer:	44
1. Tap the arrow and then Block Recognizer.	44
2. Write a letter in the box.	45
To use Transcriber:	45
1. Tap the arrow and then Transcriber.	45
2. Write anywhere on the screen.	45
To select typed text:	45
Writing on the Screen	45
To write on the screen:	46
To select writing:	46
1. Tap and hold the stylus next to the text you want to select until the insertion point appears.	46
2. Without lifting, drag the stylus across the text you want to select.	46
To convert writing to text:	46
Drawing on the Screen	48
Recording a Message	50
1. If you do not see the Record/Playback toolbar, tap .	50
2. Hold your mobile device's microphone near your mouth or other source of sound.	50
3. Tap and make your recording.	50
4. Tap when finished. If you are recording in an open note, an icon will appear in the note. If you are creating a stand-alone recording, it will appear in the note list.	50
Using My Text	51
Find and Organize Information	51
1. On the menu, tap Programs, and then select File Explorer.	51
2. Tap My Device, and then tap to open any folder.	52
3. To change folders, tap My Device, point to your folder, and then tap to open. Tapping Name allows you to sort the folders by ascending or descending order.	52
4. To create a new folder, tap and hold on the screen, and then select New Folder from the pop-up window.	52
Customize Your Toshiba Pocket PC	52
Adjusting Settings	52
Adding or Removing Programs	52
1. Determine your device and processor type so that you know which version of the software to install.	53
2. Download the program to your computer (or insert the CD or disk that contains the program into your computer). You may see a ...	53
3. Read any installation instructions, Read Me files, or documentation that comes with the program.	53
4. Connect your device and computer.	53
5. Double-click the *.exe file.	53
To add a program directly from the Internet	54
1. Determine your device and processor type so that you know which version of the software to install.	54
2. Download the program to your device straight from the Internet using Pocket Internet Explorer. You may see a single .xip, ....	54
3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions.	54
4. Tap the file, such as a .xip or .exe file. The installation wizard will begin. Follow the directions on the screen.	54
To add a program to the Start menu	54
To remove programs	54
Setting a Password	55
1. Tap and then Settings. On the Personal tab, tap Password.	55
2. Select the type of password you would like to use.	55
3. Enter a password and tap OK.	55
4. Tap YES on the confirmation screen. The password is saved and the screen returns to the Personal tab screen	55
Setting the Screen Light	55
1. Tap and then Settings. On the System tab, tap Screen Light.	55
2. Set the Screen Light on battery power.	55
3. Set the Brightness level.	56
4. When finished, tap OK to return to the System tab screen.	56
Setting Power	56
1. Tap and then Settings. On the System tab, tap Power.	56
2. Set the Power.	57
3. Select the Option tab to adjust when battery alarm will come on, and to enable/disable Record and Program buttons wake up.	57
4. Select CPU speed tab to set the CPU performance. To conserve battery power, but decrease performance, select 200 MHz.	58
5. Tap Apply to change the setting, then the confirmation screen is displayed.	58
6. When finished, tap OK to return to the System tab screen.	58
Setting Memory	59
To change Memory allocation:	59
1. Tap and then Settings. On the System tab, tap Memory to display the Memory setting screen.	59
2. Drag the knob left to right to adjust the memory allocation between Storage and Program.	59
3. When finished, tap OK to return to the System tab screen.	59
1. Tap Storage card tab on the Memory setting screen.	59
2. When finished, tap OK to return to the System tab screen.	59
To release memory:	59
Flash ROM Disk (NAND Flash Memory)	60
1. On the Start menu, tap Programs, and then File Explorer.	60
2. Open Local Device folder, and then tap Flash ROM Disk.	60
1. On the Start menu, tap Settings, System tab, and then Memory.	60
2. Tap the Storage Card tab, and then select Flash ROM Disk.	60
1. Select a location for storage by tapping Tools, Options, and then select either CF card, SD Card or Flash ROM Disk.	60
2. Tap OK.	60
Setting Advanced Sounds	60
1. Tap Start and then Settings. On the System tab, tap Advanced Sounds.	60
2. Select the Built-in tab and adjust the Volume of the built-in speaker.	60
3. If using headphones, select the Headphone tab and make adjustments.	61
Setting Microphone	61
1. Tap Start, then Settings. On the System tab, tap Microphone.	61
2. Select one the three settings. If you select Custom, tap Configure to adjust the recording levels. When Auto Gain Control is selected, control over Volume, Mute and Boost are is not available.	61
System Information	61
Identity Tab	62
Memory Tab	62
Drivers Tab	62
System Tab	62
Wireless Tab	62
Tools Menu	63
Chapter 3:	64
Chapter 3: Microsoft ActiveSync	64
Change the synchronization schedule	65
1. To synchronize periodically during peak times, select the frequency of synchronization in the During peak times, sync list.	65
2. To synchronize periodically during off-peak times, select the frequency of synchronization in the During off-peak times, sync list.	65
3. To set the days and hours for peak times, tap Peak Times.	65
Chapter 4:	66
Chapter 4: Microsoft Pocket Outlook	66
Calendar: Scheduling Appointments and Meetings	66
To create an appointment:	66
1. If you are in Day or Week view, tap the desired date and time for the appointment.	66
2. Tap New.	66
3. Using the input panel, enter a description and a location. Tap first to select the field. You can also tap and select available, predefined text or locations.	66
4. If needed, tap the date and time to change them.	66
5. Enter other desired information. You will need to hide the input panel to see all available fields.	66
6. To add notes, tap the Notes tab. You can enter text, draw maps, or create directions or recordings. For more information on creating notes, see \	67
7. When finished, tap OK to return to the calendar (the appointment is automatically saved).	67
Using the Summary Screen	67
Creating Meeting Requests	67
To schedule a meeting:	67
1. Create an appointment by tapping New.	67
2. In the appointment details, hide the input panel, and then tap Attendees.	67
3. From the list of email addresses you’ve entered in Contacts, select the meeting attendees.	67
Contacts: Tracking Friends and Colleagues	67
To find a contact:	68
1. Tap All Contacts to select the category of contacts you want displayed in the list.	68
2. Tap Find a name and enter of a name to quickly find it in the list.	68
3. Tap the screen to see additional phone numbers and email address for the contact.	68
4. Tap on the contact to display or edit the contact details.	68
5. Tap and hold on the contact to display a pop-up menu of actions.	68
To create a contact:	68
1. Tap New.	68
2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields (use the scroll box or scroll arrows).	68
3. To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you can display contacts by category.	68
4. To add notes, tap the Notes tab. You can enter text, draw maps, or create directions or recordings. For more information on creating notes, see \	68
5. When finished, tap OK to return to the contact list.	68
Finding a contact	68
Using the Summary Screen	69
Tasks: Keeping a To Do List	69
1. Tap All Tasks to select the category of tasks you want displayed.	69
2. Tap the task to display or edit. Tapping Priority allows you to sort the folders by ascending or descending order.	69
To create a task:	69
1. Tap New.	69
2. Using the input panel, enter a description.	69
3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields.	69
4. To assign the task to a category, tap Categories and select a category from the list. In the task list, you can display tasks by category.	69
5. To add notes, tap the Notes tab. You can enter text, draw maps, or create directions or recordings. For more information on creating notes, see \	69
6. When finished, tap OK to return to the task list.	69
Using the Summary Screen	69
Notes: Capturing Thoughts and Ideas	69
To create a note:	70
1. Tap New.	70
2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see \	70
Inbox: Sending and Receiving Email Messages	71
Synchronizing Email Messages	71
Using the Message List	72
To read your messages:	72
1. Tap Inbox to select the service and folder you want to display.	72
2. Tap the message to open. Tap and hold on the message to display a pop-up menu of actions.	72
3. Tapping Received Date allows you to sort the messages by ascending or descending order	72
4. To connect, send and receive email, tap the Send/Receive icon on the command bar.	72
5. To connect to a selected account, tap the Account icon on the command bar.	72
To respond to a received message:	72
1. To reply to or forward the selected email, tap the Reply icon on the command bar.	72
2. Tap the OK to return to the message list.	72
Composing Messages	73
To compose a new message:	73
1. In the message list, tap New.	73
2. In the To field, enter the email address of one or more recipients, separating them with a semicolon, or select a name from t...	73
3. Compose your message. To enter preset or frequently used messages, tap My Text and select a message.	73
4. Tap Send when you’ve finished the message. If you are working offline, the message is moved to the Outbox folder and will be sent the next time you connect. If you are working online, it is sent immediately.	73
Managing Email Messages and Folders	73
Folder behavior with a direct connection to an email server	74
Chapter 5:	75
Chapter 5: Companion Programs	75
Pocket Word	75
Typing Mode	76
Writing Mode	78
Drawing Mode	79
Recording Mode	79
Pocket Excel	79
Tips for Working in Pocket Excel	81
MSN Messenger	81
Setting Up	82
1. In the Tools menu, tap Options and then Accounts tab.	82
2. Select Enable MSN Messenger Service and/or Enable Exchange Instant Messaging.	82
3. Enter your sign-in name and password for the selected account(s).	82
4. If you selected both accounts, under Sign in using this account first, select which account to sign in to first.	82
5. To sign in, tap the sign-in screen and then Sign in.	82
Working with Contacts	83
Chatting with Contacts	84
Windows Media Player	86
Microsoft Reader	87
Getting Books on Your Device	87
Using the Library	88
Removing a Book	90
Pictures	91
Edit Pictures	91
Send Pictures	92
Set Picture as Background	92
1. In Pictures, tap the picture you want to set as the background.	92
2. Tap Tools and then Set as Today Wallpaper.	92
View Slideshow of Pictures	92
Chapter 6:	93
Chapter 6: Pocket Internet Explorer	93
The Mobile Favorites Folder	93
Favorite Links	93
Mobile Favorites	93
To create a mobile favorite:	94
1. In Internet Explorer 5 or greater on your PC, browse to the page you want to view offline.	94
2. Click Tools and then Create Mobile Favorite.	94
3. To change the link name, enter a new name in the Name box.	94
4. In the Update box, select a desired update schedule to keep the page in the Mobile Favorites folder up to date.	94
5. To save the link in a subfolder of Mobile Favorites, click Create In and select the desired subfolder.	94
6. Click OK. Internet Explorer will download the latest version of the page.	94
7. To download the pages that are linked to the mobile favorite you just created, in Internet Explorer on the PC, right-click th...	94
To save device memory	94
Using AvantGo Channels	95
Synchronize an AvantGo channel:	95
1. In Pocket Internet Explorer on your device, tap to display your list of favorites.	95
2. Tap the AvantGo Channels link.	95
3. Tap Activate.	95
4. Follow the directions on the screen. You will need to synchronize your device with your PC and then tap My Channels to complete the AvantGo setup.	95
Using Pocket Internet Explorer	96
To view mobile favorites and channels:	97
1. Tap Favorites to display your list of favorites.	97
2. Tap the page you want to view.	97
To browse the Internet:	98
1. Set up a connection to your ISP or corporate network using Connections, as described in \	98
2. To connect and start browsing, do one of the following:	98
Chapter 7:	99
Chapter 7: Getting Connected	99
Transfer Items Using Infrared	99
To send information:	99
1. Switch to the program where you created the item you want to send and locate the item in the list.	99
2. Align the IR ports so that they are unobstructed and within a close range.	99
3. Tap and hold the item, and tap Beam Item on the pop-up menu.	100
To receive information:	100
1. Align the IR ports so that they are unobstructed and within a close range.	100
2. Have the owner of the other device send the information to you. Your device will automatically receive it.	100
Connect to the Internet	100
To create a modem connection to an ISP:	100
1. Obtain the following information from your ISP: ISP dial-up access telephone number, user name, password, and TCP/IP settings. Some ISPs require information in front of the user name, such as MSN/username.	100
2. If your device does not have a built-in modem, install a modem card, or use or use a NULL modem cable and appropriate adapters to connect an external modem to your device through the serial port.	100
3. Tap , Settings, Connections tab, Connections.	100
4. In My ISP, tap Add a new modem connection, and follow the instructions in the New Connection wizard.	100
5. Enter a name for the connection, such as your ISP's name.	100
6. In the Select a modem list, tap your modem type. If you are using any type of external modem, in the Select a modem list, select the modem by name. If a listing does not exist for your external modem, tap Hayes Compatible on COM1.	101
7. Enter the phone number exactly as you want it dialed. If you know part of the phone number will change frequently as you travel, use dialing rules to avoid creating numerous modem connections for the same phone number.	101
8. Enter your user name, password, and domain name as provided by your ISP. If a domain name was not provided, try the connection without entering a domain name.	101
9. You should not need to change any advanced settings. Instances where you will want to change advanced settings include:	101
To create an Ethernet connection to an ISP:	101
1. You do not need to create a new connection on your device. Instead, you must purchase and configure an Ethernet card that is compatible with your device.	101
2. Obtain the following information from your ISP: user name, password, and domain name.	101
3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet card, see the owner’s manual for the card.	101
4. The first time you insert the card, Network Settings will appear automatically so that you can configure the network card. If it does not appear, or to change settings later, tap , Settings, Connections tab, Connections, Advanced tab, Network Card.	102
5. If you need to enter specific server information, tap the appropriate adapter. Most networks use DHCP, so you should not have to change these settings unless your network administrator instructs you to do so.	102
6. If necessary, connect the network card to the network by using a network cable. For information, see the documentation that came with your network card.	102
Connect to Work	102
To create a modem connection to a network:	102
1. Get the following information from your network administrator: dial- up access telephone number, user name, password, domain name, and TCP/IP settings.	102
2. If your device does not have a built-in modem, install a modem card.	102
3. Tap , Settings, Connections and then tab Connections.	102
4. In My Work Network, tap Add a new modem connection, and follow the instructions in the New Connection wizard.	102
5. Enter a name for the connection, such as your company's name.	102
6. In the Select a modem list, tap your modem type. If you are using any type of external modem, in the Select a modem list, select the modem by name. If a listing does not exist for your external modem, tap Hayes Compatible on COM1.	102
7. Enter the phone number exactly as you want it dialed. If you know part of the phone number will change frequently as you travel, use dialing rules to avoid creating numerous modem connections for the same phone number.	103
8. Enter your user name, password, and domain name as provided by your network administrator. If a domain name was not provided, try the connection without entering a domain name.	103
9. You should not need to change any advanced settings. Instances where you will want to change advanced settings include:	103
To create an Ethernet connection to a network:	103
1. You do not need to create a new connection on your device. Instead, you must purchase and configure an Ethernet card that is compatible with your device.	103
2. Get the following information from your network administrator: user name, password, and domain name.	103
3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet card, see the owner’s manual for the card.	103
4. The first time you insert the card, Network Settings will appear automatically so that you can configure the network card. If...	103
5. If you need to enter specific server information, tap the appropriate adapter. Most networks use DHCP, so you should not have to change these settings unless your network administrator instructs you to do so.	104
6. If necessary, connect the network card to the network by using a network cable. For information, see the documentation that came with your network card.	104
1. A VPN connection enables you to securely connect to servers, such as a corporate network, via the Internet. Ask your network administrator for your user name, password, domain name, TCP/IP settings, and host name or IP address of the VPN server.	104
2. Tap , Settings, Connections and then tab Connections.	104
3. To create a new VPN server connection, in My Work Network, tap Add a new VPN server connection and follow the instructions in the New Connection wizard.	104
4. In Name, enter a name for the connection, such as your company's name. In Host name/IP, enter the VPN server name or IP addre...	104
5. Select the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator.	104
6. Enter your user name, password, and domain name as provided by your ISP or network administrator. If a domain name was not provided, try the connection without entering a domain name.	104
7. You should not need to change any advanced settings. Instances where you must change advanced settings include:	104
1. Tap , Settings, Connections tab.	105
2. To change proxy server settings, in My Work Network, tap Edit my proxy server.	105
3. Select This network connects to the Internet and This network uses a proxy server to connect to the Internet.	105
4. In the Proxy server box, enter the proxy server name.	105
5. To change such settings as port number or proxy server type, tap Advanced and change desired settings.	105
End a Connection	105
Connect Directly to an Email Server	105
To set up an email account:	106
Get Help on Connecting	106
Chapter 8:	107
Chapter 8: Wi-Fi Wireless LAN	107
Overview	107
Configure Wireless LAN Network	107
Join an existing network	107
Launch a wireless LAN configuration	108
Turn Off/On Wireless LAN connection	108
Power Off/On the wireless LAN modules	109
Selecting a preferred network	109
IP Address	109
IP Address Page	109
IP Address:	110
Subnet mask:	110
Default gateway:	110
Name Servers Page	110
DNS:	111
WINS:	111
Alt DNS:	111
Alt WINS:	111
Wireless LAN Configuration	112
Set up a wireless network	112
Configure Wireless Network	113
Configure Network Authentication Screen	114
TMU Traffic Monitoring Utility	115
Icon Specification	115
Wireless Communication switch off:	115
Wireless Communication power off:	115
Wireless power on:	115
Wireless LAN Manager	116
Link Screen	116
Power Screen	117
Manager Screen	118
Info Screen	119
Toshiba Enroller	119
Certificate from network	120
Certificate from file	121
Manage Page	122
Root Page	123
Advanced Page	124
Toshiba Certificate Import Wizard	125
Start Screen	125
Example: Obtaining a TLS certificate from a CA server (1)	126
Example: Obtaining a TLS certificate from a CA server (2)	127
Example: Obtaining a TLS certificate from a CA server (3)	128
Example: Obtaining a PEAP certificate from a file (1)	128
Example: Obtaining a PEAP certificate from a file (2)	129
Example: Obtaining a certificate from a file (3)	130
Using ConfigFree™	130
ConfigFree Launcher	130
Profile Settings	131
Search for Wireless Devices	131
Connectivity Doctor	131
ConfigFree Launcher	131
Starting ConfigFree Launcher	131
1. Tap , Programs, and ConfigFree.	131
2. Tap ConfigFree.	131
Profile Settings	132
Starting Profile Settings	132
1. Tap , Programs, and ConfigFree.	132
2. Tap Profile Settings.	133
Description of Main Dialog	133
Description of Command Bar	133
Adding a profile	134
Description of Start Dialog	134
Description of Finish Dialog	135
Search for Wireless Devices	136
Starting Search for Wireless Devices	136
1. Tap , Programs, and ConfigFree.	136
2. Tap Search for Wireless Devices.	136
Description of Command Bar	136
Connectivity Doctor	136
Starting Connectivity Doctor	137
1. Tap , Programs, and ConfigFree.	137
2. Tap Connectivity Doctor.	137
Description of Command Bar	137
Chapter 9:	139
Chapter 9: TOSHIBA IP Phone for Pocket PC	139
Sign-up	139
Launching an application	139
Details	139
Chapter 10:	140
Chapter 10: Bluetooth	140
About Bluetooth Software	140
Specifications	140
Major specifications	141
Bluetooth Settings	142
Enabling Bluetooth on Your Toshiba Pocket PC e800/e805	142
Bluetooth Environmental Settings	143
1. Tap Bluetooth icon and select Bluetooth Settings from the pop-up menu.	143
2. Tap Options on the command bar.	143
3. Tap Security Settings on the Options menu.	143
Advanced Settings	143
4. Tap the Options menu and Local Device.	144
Preparing to Connect with Bluetooth	145
1. Tap Bluetooth icon	145
2. Tap Bluetooth icon on the command bar, or tap the Tools menu and Devices Search.	145
3. Tap and hold on the name of the device to which you want to connect, then tap Update Service on the pop-up menu.	146
Using COM Service	148
Establishing an ActiveSync connection with a computer	148
Preparations	148
1. From the service list on the Bluetooth Settings screen, tap and hold on the name of the COM service to which you want to conn...	148
2. Tap OK. The screen closes and the Today screen appears.	148
3. From the computer, set the port that you will use when you are connecting with Bluetooth. The computer is now ready to connec...	148
4. Tap Start, Programs, Bluetooth, and then Bluetooth Connection. Your Toshiba Pocket PC e800/e805 connects to the computer. When the connection is complete, the Programs screen reappears.	148
Using DUN/LAP Service	149
Connecting to the Internet	149
Preparations	149
1. From the service list on the Bluetooth Settings screen, tap and hold on the name of the DUN or LAP service to which you want to connect, then tap Connection Registration on the pop-up menu. The screen is connected to DUN service.	149
2. Tap OK. The screen closes and the Today screen appears. For further operations, please refer to \	149
Using PAN Service	149
Connecting to the Network (Intranet, Internet or Peer-to-Peer)	149
1. From the service list on the Bluetooth Settings screen, tap and hold on the name of the PAN service (GN or NAP) to which you want to connect, then tap Connection Registration on the pop-up menu.	150
2. Tap OK.	150
3. Tap on the Bluetooth icon on the command bar.	150