Tripp Lite 0SU22081 Quick Start Guide for Minicom Cat5 KVM Switches 933194 - Page 4

SMART CAT5 SWITCH - 108/116 Switch between the connected computers by either  The front panel Select buttons  Keyboard hotkeys - To switch to the next computer forwards press Shift then, +. Release Shift, before pressing +. To switch to the next computer backwards press Shift then, -. Release Shift, before pressing -.  Control software (See softcopy User Guide)  The OSD The OSD is also the place to adjust various settings as explained in the softcopy User Guide. When switching computers the illuminated LED of the top row indicates which computer is currently selected. 9. The OSD To display the OSD: Press Shift twice. The OSD Main window appears. Navigating the OSD To navigate up and down use the Up and Down arrow keys. To exit the OSD press Esc. 10. Selecting a computer To select a computer: 1. Navigate to the desired computer line. Or, type the port number of the desired computer. 2. Press Enter. The selected computer is accessed. An OSD label appears showing which computer is accessed. Note! When the OSD is displayed you cannot select computers using the front panel Select buttons or the keyboard hotkeys. 11. Resetting the switch To reset the switch press the 2 front panel Select buttons simultaneously. The ROCs are unaffected by this reset. For the rest of the configuration and operating instructions please see the softcopy User Guide on the supplied CD or on our website http://www.minicom.com/supportuserguides.htm 3 201204197 • 933194_EN