Tripp Lite B043-DUA8-SL Owner's Manual for B043-DUA8-SL Peripheral Sharing KVM - Page 7

Operation Bind KVM and USB [Scroll Lock] [Scroll Lock] [Z] Hub Functionality Select the Previously [Scroll Lock] [Scroll Lock] Selected Computer [Backspace] Port Select the Next Higher Accessible Port [Scroll Lock] [Scroll Lock] [↑] Select the Next Lower Accessible Port [Scroll Lock] [Scroll Lock] [↓] Turn Beep Sound On/Off Auto Scan [Scroll Lock] [Scroll Lock] [B] [Scroll Lock] [Scroll Lock] [S] [x] x = 1 - 9 When the KVM and USB Hub functionality have been unbinded, performing this hotkey command will bind them back together. The focus of the USB Hub ports, KVM and Audio will now all switch at the same time. The KVM and USB Hub functionality are binded together by default. Switches the focus of the KVM, Audio, and USB Hub ports to the last computer port that was accessed prior to your current port. Switches the focus of the KVM, Audio, and USB Hub ports to the next higher accessible port in the installation. (e.g. 1 to 2, 2 to 3, etc.) This hotkey command only switches to accessible ports and will not switch to an empty port. Switches the focus of the KVM, Audio, and USB Hub ports to the next lower accessible port in the installation. (e.g., 3 to 2, 2 to 1, etc.) This hotkey command only switches to accessible ports, and will not switch to an empty port. Toggles the Beep sound on and off. The Beep sound is turned on by default. Activates an Auto Scan at a time interval from 10 to 90 seconds. (e.g. 1 = 10 seconds, 2 = 20 seconds, etc.) Press any key during an Auto Scan to stop it at the currently selected port. Auto Scan only switches between accessible ports, and will not switch to an empty port. 7 14-03-102-933345.indd 7 4/2/2014 10:43:33 AM